Monday, September 26, 2011

Recycled Posters

I mentioned in a previous post that I have tons of wall space and not a lot of art. Well, I'm working on it!

The Beavis is such a huge Beatles fan so I thought he would appreciate the Fab Four watching over us in our living room. He had this huge Beatles poster that hung in his room during high school and college. It's been rolled up in a tube for many years. I hated to let it go to waste so this is what I came up with.

I'm thinking these boards need frames to make them pop a little more

I love the look of collages, especially the way advertising posters get torn up and pasted over each other. I wanted to do something like that so I took the original poster, cut it up and applied it to decorated canvas boards. It was super cheap and easy!

I picked up some canvas boards and did a little sponge painting with whatever acrylic paints I had around the house. The sunburst motif was added with a stencil and spray paint. Then I doodled over the top with a Sharpie.

Snip, snip to the poster and throw on the Modge Podge. My finished posters have a warped, air-bubble effect which I was fine with. I've heard that if you don't want your decoupaged pieces to look warped that you should soak the paper in water before applying to the surface. Also, make sure to apply the adhesive to the front and the back of the paper.

The other walls in the room are getting some love too.

The giant clock was a P.I.T.A. to hang. Just ask Beavis. And guess what? The battery just died. It is now perpetually 8PM.

Friday, September 23, 2011

Anniversary Art

I got such a nice surprise the other day. Beavis gave me my 7th wedding anniversary present early.

He wanted to follow traditional anniversary gift materials this year. The 7th anniversary is the wool or copper anniversary. Well, I've got tons of wool just sitting in a cabinet waiting to be knitted into stuff so he figured I was set.

Beavis went with copper and found this awesome piece of art from Jenn Bell. I love it! Melted glass over copper, what could be better!  Go check out her site and order some art!

Thursday, September 22, 2011

Embracing the Booty!

I am just a few days away from my 2.25" button press machine getting here! I am so excited! I plan on offering my design clients over at MPowered Design button/badge promotional products with more sizes to come in the future. I've been playing with potential, fun button designs in Photoshop and Illustrator.

Aww yea they do!

Wednesday, September 14, 2011

I don't need OxiClean, I have paint and freezer paper!

It doesn't matter what I'm wearing, I always manage to spill something on myself. In fact, I have a salsa stain from today's lunch on my shirt right now.

Usually the stains come out in the wash but every now and then I'm stuck with them. So, I decided to make some lemonade out of lemons and save a t-shirt.

Ta da!!! The stain has magically disappeared!

I used a freezer paper stencil to add this groovy flower to my shirt. To create your own custom shirt you'll need:

 - a shirt, duh!
 - freezer paper (make sure it is freezer paper, don't use wax paper!)
 - fabric paint and a sponge or brush to apply it with
 - a piece of cardboard large enough to fit inside your shirt
 - craft knife and cutting board 
 - an iron and ironing board

My greasy shirt
I started off with a flower drawing that I did in Adobe Illustrator. Don't worry if you are not a designer. Any clip art, drawing or text will do just fine. Just make sure that your design is simple enough to cut out with a craft knife. I've seen some awesome, detailed freezer paper stencils so if you have patience and a steady hand, go for that intricate design. Otherwise, simple shapes work best.

I sized my design to fit on a standard piece of 8.5"x11" paper and then cut out a piece of freezer paper to those dimensions.

You'll need to either print your design or trace/draw it on the freezer paper.  (TIP! If you are going to use a printer make sure to feed the freezer paper so that printing is on the paper side. Run a test with a piece of regular paper and mark a corner on it to make sure which way the freezer paper needs to be placed in the printer tray.)

Once you have your design on the freezer paper you'll need to cut out the parts of the stencil that expose the parts of the shirt you want painted. Take your time cutting out the stencil and use a cutting board or thick piece of cardboard for a cutting surface. You want clean lines.

Place the stencil on the shirt right where you want your design with the waxy side down and adhere it to the shirt with a warm iron (no steam!). Run the iron over the stencil until it is completely stuck to the shirt.

To prevent the fabric paint from seeping to the other side of your shirt, place a piece of cardboard inside it to act as a barrier. Now apply the fabric paint with a small sponge or stiff bristle brush. I prefer to do several light coats of paint so that I don't get any accidental drips. I also apply the paint with light up and down dabs. If you swipe your brush back and forth you might get some of the bristles underneath the stencil.

Once the paint has dried, peel off the freezer paper. Follow the paint manufacturer's instructions for heat setting the paint. The brand I used just needed a final ironing to set the paint.

Ta da! Instant stain removal!